 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FN1010 SERIES Load Pin www..com * Full Scale Range from 0-10 kN to 0-2000 kN * Tension and Compression * Simple to use * High coefficient of security * Optional: Watertight * Bidirectional versions available * High Level Output Model with Integrated Amplifier FGP Sensors' load pins, model FN1010, are designed to fit in the place of the regular mounting unit. The implantation is facilitated by the possibility of modifying a certain number of dimensions. The FN1010 is suitable for numerous applications on lifting motors and handling equipment. The load pins can be used to measure forces on rotating components (pulleys, sheaves, etc.) and can be directly mounted on shackles. The FN1010 is available in standard ranges from 0-10 to 0-2 000 kN. The sensing element is fitted with thin film strain gauges in a Wheatstone bridge circuit. All FN 1010 load pins incorporate a keyed anti-rotation slot. Optionally, the load pins may be made watertight for certain applications while resting insensitive to hydrostatic pressure effects. Additionally, the FN1010 is available with an integrated high-level analogue output. Dimensions in mm F.S. in kN 10 20 50 100 200 500 1000 2000 Min. 22 27 30 42 54 82 110 150 A Nominal 25 30 35 45 60 90 120 160 Max. 30 35 40 50 65 100 130 170 Min. 25 25 30 40 50 65 80 120 B Nominal 30 30 40 50 70 90 110 160 All dimensions correspond to a standard. They can be modified, if necessary, for mounting. Please consult us for details. In order to simplify the use of load pins and limit the mechanical modifications associated with their implantation, all dimensions are given between two limits within which performances and characteristics can be maintained without increasing financial cost to the user. Note: The delimiter groove can be placed on the output cable side. With many years of experience as a designer and manufacturer of sensors, FGP Sensors has the expertise to customize and/or design sensors for specific uses and testing environments. To meet your needs we also offer complete turnkey systems. Our conditioning electronics can power the sensor, amplify the electronic signal, and display the data digitally. A turnkey measurement system arrives with matched components, formatted, calibrated and ready for your immediate use. C Max. 35 35 50 65 90 115 140 200 Min. 10 10 15 20 25 30 40 60 Nominal 15 15 20 25 30 40 55 80 Max. 20 20 25 30 35 50 70 100 D 3 3 4 5 5 5 5 5 E 5 5 5 10 10 10 15 15 Photographs non contractual. All specifications are nominal. They are subject to change without notice and assume correct loading of the device. 19/01/2005 www.fgpsensors.com * Tel. +33 (0)1 30 79 65 40 * Fax. +33 (0)1 30 54 01 43 * scom@fgp.tm.fr Technical Specifications Range (F.S.) 0-10, 0-20, 0-50, 0-100, 0-200, 0-500, 0-1000, 0-2000 kN Over-range Without Damage : 1.5 x F.S. Without Destruction : 5 x F.S. Accuracy Combined Non Linearity & Hysteresis : 1% F.S. Temperature Range Operating Temperature Range (OTR) : -20 to 80 C Compensated Temperature Range (CTR) : 0 to 60 C Zero Shift in CTR : <0.5% F.S. / 60 C Sensitivity Shift in CTR : <2.10-4 / C of reading Electrical Characteristics Model Supply Voltage F.S. Output Zero Offset Input Impedance/Consumption Output Impedance Insulation under 50 Vdc Electrical Termination Shielded cable, standard length 2 m Mechanical Characteristics Material : Body in stainless steel Product References Low Level Output Sensor Model Full Scale Range (F.S.) In kN OA In mm Wiring Schematic FN1010 Size B In mm Size C In mm FN1010 10 Vdc 1.5 mV/V <5% F.S. 350 to 700 350 to 700 100 M FN1010-A1 10 to 30 Vdc 0.5 to 4.5 V 2.5 V 5% F.S. <50 mA <10 100 M FN1010-A2 15 Vdc (12 to 18 Vdc) 5 V 0 V 5% F.S. <50 mA <10 100 M FN1010-A3 (2 wires) 12 to 36 Vdc 4-20 mA (4-12-20) 4 (or 12 mA) 100 M www..com FN1010 20 A27 B30 C15 FN1010-A1 High Level Output Sensor Model Power Supply Reference A1 : Unipolar-tension A2 : Bipolar-tension A3 : Current output Full Scale Range (F.S.) In kN OA In mm FN1010-A2 Size B In mm Size C In mm FN1010 A1 20 A27 B30 C15 All specifications are nominal. They are subject to change without notice and assume correct loading of the device. Current specifications see web-site. 19/01/2005 Force * Torque * Pressure * Acceleration Standard Sensors and Custom Specials ! 24, rue des Dames * ZI des Dames * BP58 * 78344 LES CLAYES SOUS BOIS CEDEX - FRANCE Tel. +33 (0)1 30 79 65 40 * Fax. +33 (0)1 30 54 01 43 * www.fgpsensors.com * scom@fgp.tm.fr |
Price & Availability of FN1010
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |